How do you open the Xbox 360 power supply?

Use a drill to make holes in the plastic caps covering the screws. Then use a screwdriver to remove them on all sides. (You can also pry them off with a knife if you want.) Then pull on each side to get the power supply open.

How do I fix my Xbox 360 power supply?

Unplug the power supply from the console and the wall outlet. Let the power supply cool for 30 minutes. Make sure the power supply is in a well-ventilated space, and the ventilation openings on the power supply are not covered. Reconnect the power supply to your console and plug it back into the wall outlet.

How do I fix my Xbox 360 Slim it wont turn on?

How to Fix an Xbox 360 That Won’t Turn On

  1. Unplug the Xbox from the wall and plug it back in.
  2. Check the Xbox 360 power changer.
  3. Let the Xbox 360 cool down.
  4. Disconnect and reconnect all A/V cables from the TV and Xbox 360 console.
  5. Remove and reinstall the Xbox 360 hard drive.

Can you fix a Xbox 360 power brick?

Having your Xbox 360 power supply repaired isn’t a great idea, as the repair would take almost as much as a new power brick. A replacement would be so much more hassle-free, and what better place to look at than Esource Parts.

What color should Xbox 360 power supply be?

Check the light on your power supply Solid green or solid orange light: Your power supply is working. If your console won’t turn on, try our Xbox 360 No Power Solution.

How do you fix the red light on the Xbox 360 power brick?

If the power supply light is solid red or flashing orange, unplug the power supply and let it cool for 30 minutes. Then, plug the power supply back into the outlet.

What kind of power supply do I need for Xbox 360?

To repair your Xbox 360, use our service manual. Here is an image that shows the different plugs for the different power supplies The one to be tore down is Model # HP-AW175EF3. Input 100V-127V output 12V 14.2A, 5V 1A Remove all four rubber feet from the bottom of the PSU.

How to remove power supply from Xbox 360?

After you get the screws out, with the power supply still laying bottom up, pull on the bottom half of the plastic shell. It should come up with little effort. The next thing you need to do is look for a single screw hidden down between the light and the output cord. This screw secures the heatsink to the PSU. Remove it.

Where is the power cord on an Xbox 360?

Unplug the power cord from the back of the console. Unplug the power supply from the electrical outlet, and then unplug the short cord from the power supply. Plug the power cord back into the console, and then plug the power cord back into the electrical outlet and the power supply.

How long are Phillips screws on Xbox 360 power supply?

With the rubber feet and the plastic cap removed, the Phillips screws will now be visible. All the Phillips screws are 3/4 inch long. Here are the feet, caps and screws that needed to be removed. Use a plastic opening tool, or similar instrument, to widen the gap between the top and bottom half of the PSU.