Why are my JLab headphones not working?

Your Jlab earbuds need to be manually reset Place your earbuds in the charging case, leaving the case open. Beginning with one of your earbuds first, you should tap the button 4 times. We should see blue lights blinking 4 times before turning a solid blue. Repeat this for your other earbud.

Why are my JLab earbuds choppy?

Update your device to the latest operating system. Update your apps to the latest version. Check your wireless network that your device is connected to. Resetting it will often attempt to use the 2.4 and 5 GHz channels with the least interference.

Why does one side of Bluetooth headphones stop working?

Make sure that the mono setting is not enabled. Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings.

How do I reset my JLab headphones?

When earbuds are off, press and hold 15+ seconds on the RIGHT earbud button. While holding, earbud will flash blue and white. Release when earbud flashes white.

Why do my wireless headphones keep disconnecting?

Bluetooth headphones have a tendency to periodically disconnect when they are low on battery. Try unpairing your headphones and then re-pairing them with your smartphone. Check if others are also facing a similar issue. Sometimes, random disconnections can be caused by buggy software, and it isn’t really your fault.

Why do my wired headphones keep cutting out?

If your headphones cut out when moved, then you’re probably looking at a wiring problem already. Static in sound – Static may mean a lot of things but a short circuit is definitely one of the most reasonable explanations. Simply put, the static you’re hearing may be caused by the fluctuating charges along the wires.

Why does my headset keep cutting out?

Signal issues There could be several reasons for signals dropping. For example, long distance between the devices, headphones turning old, or low range of Bluetooth headphones. These issues cause signals issues, and audio within the Bluetooth device starts shaking.

How do I pair JLab left and right earbuds?


  1. When earbuds are off, press and hold 15+ seconds on the RIGHT earbud button.
  2. Repeat process with LEFT earbud: Press and hold 15+ seconds on earbud button.
  3. Once earbuds connect, the right earbud will flash blue and white indicating it is ready to connect to Bluetooth.

How do I fix my headphones when only one side works?

Simple Fix To One Headphone not working Right/Left

  1. Jack not inserted properly.
  2. Check your sound balance in device settings.
  3. Mono sound setting.
  4. Dirty Earbuds.
  5. Inspect the wires for damage.
  6. Problem with the device headphone slot.
  7. Check for signs of water damage.
  8. Re-pairing wireless headphones.

Why is one side of my headset not working?

Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds. The voice levels must be equal on both sides of your headset.