What is the difference between 6011 and E6011?

What is the difference between 6011 and E6011?

However, for 60,000 tensile, what is the advantage of 6010 over 6011? A: E6010 and E6011 are two American Welding Society (AWS) classifications for Shielded Metal Arc Welding (SMAW) electrodes (stick electrodes). The main difference between the two is with the recommended welding polarity.

What does E6011 mean in welding?

SMAW Electrodes Here are some of the most common welding rods. E6010 – an all-position rod especially used in pipe welding, known for its tight arc. E6011 – all-position rod that is a preferred choice for maintenance work, or where metal is rusted and/or dirty.

What is the cost of welding electrode?

Electrodes – Price Range

What is E6011 welding rod used for?

E6011 electrodes can also be used for all-position welding using an alternating current (AC) welding power source. Like E6010 electrodes, E6011 electrodes produce a deep, penetrating arc that cuts through corroded or unclean metals.

What is the most used welding rod?

The most common rods in welding are 7018, 7014, 6013, 6011, and 6010. Using a 7018 rod as an example, you can determine the tensile strength of the rod by the first two numbers. The numbers represent the pounds per square inch (psi) that the resulting weld can withstand.

What is the best welding rod for rusty metal?

If you’re dealing with rusty metal, it’s recommended that you use a welding rod that’s rich in silicon or manganese, as they create thicker slag that takes the contaminants to the surface. A commonly used electrode with these properties is the 7018.

Do you push or pull when stick welding?

You Should Pull When Stick Welding Put in simpler terms, you should be pulling the rod towards you when using any welding process that produces slag. This includes submerged arc welding, electroslag welding, flux-cored arc welding and shielded metal arc welding (SMAW), more commonly known as stick welding.

What does the 60 in E6011 stand for?

Hence, in E6011, the 60 means 60 kpi (or 60,000 psi) the first number 1 signifies that the electrode can be used in all welding positions indicating that the weld solidifies quickly and thus, is very applicable for overhead welding. …

What is a 7018 welding rod good for?

The 7018 rod welds carbon steel at up to 225 amps. The 7018 arc welding rod is commonly used for general-purpose welding of carbon steel. It is a mild steel rod that is coated with a low-hydrogen, iron-based flux compound that vaporizes to shield the molten weld bead from contamination by air and moisture.

What do the numbers on welding rods represent?

What Do the Numbers on Welding Rods Represent? Number Format. Numbers for mild or low alloy steel electrodes begin with an “E” prefix (meaning “electrode”) followed by a four or five-digit number in most cases. Tensile Strength. Position. Coating. Extra Numbers and Letters.

What are the sizes of welding rods?

These rods come in a range of sizes to suit the needs of different projects and welding techniques. The smallest rods measure 1/16-inch (1.6 mm) in diameter, while the largest are generally no greater than 5/16-inch (7.9 mm) in diameter. Thicker rods require higher electrical amps, which are generated by the welding machine.

What is electrode in welding?

An electrode or a welding rod is a wire which is made up of wire and is coated. The electrode is made up of materials which are similar to that of the metals chosen to be welded.