What does Error Code F mean on Whirlpool washer?
The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen. When the door fails to lock, the machine won’t run at all.
What does the code F21 mean on a Whirlpool washer?
If you see error code F21 on your Whirlpool washing machine, this refers to a water drain problem. The washer won’t be able to finish the cycle and your laundry will be wet. This error code means draining is taking too long, and something is wrong with the water pumping.
How do I fix error f5 e3?
Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.
How do you reset error F21?
Reset. When the “F21” error code appears, try pressing “Pause/Cancel” to stop the current wash cycle. If water remains in the washing machine tub, touch “Drain/Spin” to force a secondary drain cycle to remove the water. Once all the water drains, try selecting a new wash cycle and pushing “Start.”
What causes a whirlpool duet washer to error code F35?
In simple words, the water level sensor measures the pressure in the tank, which raises the amount of water filling it. What can cause the F35 Error? There are not too many options on how to decipher the F35 code properly.
Can a whirlpool pressure switch be an error code?
Repairing both the CCU and pressure switch together ensures protection against future F35 and SUDS errors too. Possible symptoms that can occur as a result of these error codes include: Brands that may experience this issue include:
What to do if your Whirlpool pressure sensor fails?
We rebuild both the CCU (Central Control Unit) and APS (Analog Pressure Sensor) to ensure 100% functionality. Both the CCU and pressure switch have a high failure rate, so we offer a package of both to prevent you from misdiagnosing the problem.
What to do if your Whirlpool duet washer is not working?
Check the sensor for the visible signs of damage, clean it. Take out the small pipe and put a tube of the same diameter. Carefully blow it through. If you hear a “click” sound, your pressostat is fine. If not — it has to be replaced. You can also check it with a multimeter, to make sure. Now its time to check the wiring connection of the sensor.