What does a HMIS label indicate?

What does a HMIS label indicate?

The Hazardous Materials Identification System (HMIS) is a hazard rating system that uses color bar labels to identify and provide information about chemical hazards. It was developed by, and is proprietary to the National Paint Coatings Association (NPCA), now known as the American Coatings Association (ACA).

How do I read HMIS labels?

The white square shows the level of fire hazard the material poses. A “0” signifies that the material is non-flammable. A “1” indicates the material has a flash point above 200ºF, which means it must be exposed to a heat source to ignite. A “2” means the material has a flash point between 100ºF and 200ºF.

What information is required on an HMIS label?

The HCS requires chemical manufacturers, importers, or distributors to ensure that each container of hazardous chemicals leaving the workplace is labeled, tagged or marked with the following information: product identifier; signal word; hazard statement(s); precautionary 1 Page 2 2 statement(s); and pictogram(s); and …

Which color section of an HMIS color bar label contains information about personal protective equipment?

white
Symbols. The four bars are color-coded, using the modern color bar symbols with blue indicating the level of health hazard, red for flammability, orange for a physical hazard, and white for Personal Protection. The number ratings range from 0 to 4.

What does HMIS stand for?

Homeless Management Information System
A Homeless Management Information System (HMIS) is a local information technology system used to collect client-level data and data on the provision of housing and services to homeless individuals and families and persons at risk of homelessness.

Are HMIS labels required?

However, these labels must provide at least general information regarding the hazards of the chemicals. The HMIS and NFPA information is not required on SDSs; however, such information may be included if it does not contradict or cast doubt on the Hazard Communication classification.

Is HMIS label required?

The HMIS and NFPA information is not required on SDSs; however, such information may be included if it does not contradict or cast doubt on the Hazard Communication classification. c) For labels on shipped containers: The HCS has specific requirements for label elements (see 29 CFR 1910.1200(f)(1)).

What is the alternative label called?

Alternate Workplace Labeling Consists of labels that list the chemical name, synonym or common name, hazard information, Chemical Abstract Service (CAS) number, precautionary measures and first aid procedures.

Can HMIS labels still be used?

Many employers just want to know: Can you still use HMIS and NFPA labels? The official answer from OSHA, found on osha.gov states, “Yes, OSHA will continue to allow NFPA and/or HMIS rating systems on labels and SDSs as supplemental information. However, the rules for labeling and placement on the SDSs still apply.”

Where is HMIS used?

A Homeless Management Information System (HMIS) is a local information technology system used to collect client-level data and data on the provision of housing and services to homeless individuals and families and persons at risk of homelessness.

What is the most common HCS labeling system?

Hazardous Materials Identification System
Since 1994, the most prevalent voluntary workplace HazCom labeling systems have been the Hazardous Materials Identification System (HMIS) and the National Fire Protection Association (NFPA).

What is the health section of a HMIS label?

The health section of an HMIS label conveys the health hazards of the material. 0 – This material presents no health hazard. No precautions are needed. 1 – Exposure the material will cause an irritation and result in minor residual injuries.

What is the hazardous materials identification system ( HMIS )?

The Hazardous Materials Identification System (HMIS) is a numerical hazard rating that incorporates the use of labels with color-coded bars as well as training materials. It was developed by the American Paints & Coatings Association as a compliance aid for the OSHA Hazard Communication Standard.

What does the orange diamond mean on a HMIS label?

The yellow diamond is used to rate the instability (or reactivity) of the material. The orange bar on color bar RTK labels is used in the same way. On HMIS labels the orange bar is defined as rating the level of the physical hazard.

What does HMIS stand for in OSHA category?

HMIS (taken from WIKIPEDIA) The Hazardous Materials Identification System (HMIS) is a numerical hazard rating that incorporates the use of labels with color-coded bars as well as training materials. It was developed by the American Paints & Coatings Association as a compliance aid for the OSHA Hazard Communication Standard.