Is 90 HDL cholesterol good?

Higher HDL levels are associated with a lower risk of heart disease. HDL levels lower than 40 milligrams per deciliter (mg/dL) are considered worrisome, and levels higher than 60 mg/dL are considered excellent.

What if your HDL is 90?

Fonarow said a number of prior studies have found that when compared to those with more moderately high HDL levels, people with “very high” HDL levels — meaning a threshold of 90 mg/dL or more — appear to face a greater risk for heart disease.

Is an HDL level of 91 good?

An ideal HDL level is 60 milligrams/deciliter (mg/dL) or above. Your HDL is considered low if it’s below 40 mg/dL. You should aim to have an HDL level between 40 and 60 mg/dL, but over 60 mg/dL is optimal.

What is a high HDL level?

Oddly enough, people who naturally have extremely high HDL levels — above 100 mg/dL (2.5mmol/L) — appear to be at higher risk of heart disease….What are optimal levels of HDL cholesterol?

At risk Desirable
Men Less than 40 mg/dL (1.0 mmol/L) 60 mg/dL (1.6 mmol/L) or above

What is a high triglyceride number?

Normal — Less than 150 milligrams per deciliter (mg/dL), or less than 1.7 millimoles per liter (mmol/L) Borderline high — 150 to 199 mg/dL (1.8 to 2.2 mmol/L) High — 200 to 499 mg/dL (2.3 to 5.6 mmol/L) Very high — 500 mg/dL or above (5.7 mmol/L or above)

How is the solids separator used in the COMAG system?

To minimize the amount of solids escaping the unit, the solids separator is equipped with corrugated plate interceptor (CPI) packs. The solids separator is designed to maintain a sludge blanket in the hopper compartments under the CPI packs that act as a pre-filter.

How does the COMAG system improve water treatment?

Simple and reliable, the CoMag® System uses magnetite to ballast conventional chemical floc, enhancing settling rates and increasing the performance of wastewater and water treatment operations. To minimize the amount of solids escaping the unit, the solids separator is equipped with corrugated plate interceptor (CPI) packs.

How is the sludge recycle function in the COMAG system?

In addition to achieving high rate clarification, the CoMag System employs a sludge recycle function to increase the system performance and the clarity of its effluent. Approximately 85% of the clarifier underflow is recirculated back to the system’s reaction tank.

How does the recirculation loop in COMAG work?

In the recirculation loop, sludge is processed through an inline, high-speed sheer mixer where the magnetite is liberated from the floc. The resulting two-part slurry is then passed under a magnetic recovery drum. The permanent and stationary magnets inside the drum help to capture 99+% of the magnetite and return it to the system.