How high should a coat rod be?

As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement.

What is ADA height requirements?

In addition to having a maximum height of 36 inches, all accessible sales and service counters must have a clear floor space in front of the accessible surface that permits a customer using a wheelchair to pull alongside. This space is at least 30 inches by 48 inches and may be parallel or perpendicular to the counter.

Do closets need to be ADA accessible?

Closet space, whether common shared storage for employees, or within mobility feature guest rooms in hotels, student housing, or public dwelling units, needs to be accessible under the ADA. If the closet has racks or coat hooks then one minimum of each type is to be within reach range.

What is the height of a double closet rod?

If installing a double-rod closet system, mount the top rod 81-¾ inches above the floor and the lower rod 40-½ inches above the floor.

How far should closet rod be from shelf?

A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.

How long can closet rods go without support?

If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.

What is ADA compliant switch height?

The ADA requires that light switches be placed anywhere from 15 to 48 inches. A light switch mounted at 48” is not accessible for individuals with quadriplegia who use powered wheelchairs, little people, or for people carrying heavy boxes.

What percentage of toilets should be accessible?

Multiple Single-User Toilet Rooms. Where multiple single-user toilet rooms are clustered in a single location, fifty percent (50%), rather than the one hundred percent (100%) required by the 1991 Standards, are required to be accessible by section 213.2, Exception 4 of the 2010 Standards.

How tall does a water closet have to be in order to comply with Ada?

Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor. 604.9 Water Closets and Toilet Compartments for Children’s Use. Water closets and toilet compartments for children’s use shall comply with 604.9.

How big does a door have to be to be ADA compliant?

Where located in the front partition, the door opening shall be 4 inches (100 mm) maximum from the side wall or partition farthest from the water closet. Where located in the side wall or partition, the door opening shall be 4 inches (100 mm) maximum from the front partition.

What are the ADA standards for accessibility in 2010?

The 2010 Standards set minimum requirements – both scoping and technical — for newly designed and constructed or altered State and local government facilities, public accommodations, and commercial facilities to be readily accessible to and usable by individuals with disabilities.

What’s the minimum height for a low forward reach?

The minimum low forward reach is 15 in (380 mm). If the high forward reach is over an obstruction, reach and clearances shall be as shown in here-under. 4.2.6* Side Reach