How do you reset tire pressure monitoring system?

Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait 20 minutes for the sensor to refresh. The TPMS reset button is usually located beneath the steering wheel. If you are unable to find it, refer to your vehicle’s owner’s manual.

How do I resync my tire pressure sensor?

TPMS Sensor Matching

  1. Set the parking brake.
  2. Turn the ignition switch to ON/RUN with the engine off.
  3. Press and hold the keyless entry fob transmitter’s LOCK and UNLOCK buttons, at the same time, for about five seconds to start the TPMS learn mode.

How do you reset tire monitor system?

Re: reset tire pressure monitoring system. After you have inflated the tires to the correct pressure press the tire pressure button for a few seconds untill you hear a beep sound .that indicates the tire pressure has been reset.

How do you reset the tire pressure sensor?

How to Reset Tire Pressure Sensor 1. Identify the type of TPMS 2. Get your Tires Inflated 3. Monitor the Battery 4. Readjust the Transponders 5. Make Use of Magnet method 6. Utilize the Scan Tool Method

What is the best TPMS tool?

The best TPMS tool is the Autel TS601 MaxiTPMS, which is able to read and clear code of a TPMS system and activate new sensors of all known TPMS. Some of the best OBD2 scanner devices that can double up as a TPMS tool but they can cost a serious amount of money.

How do you check tire pressure monitoring system?

Fill each tire with the appropriate amount of air with the air compressor. Periodically check the PSI using the tire gauge. Screw on each valve cap. Drive the car around the block. This will allow the tire pressure monitoring system to recalculate. The system should display the correct amount of air in each tire.