How do you reset the service light on a 2008 Acura MDX?

Press the SEL/RESET button on the lower right side of the steering wheel to scroll through the options until You see REMAINING OIL LIFE DISPLAYED. Once You see that, press the button again and hold it for at least 10 seconds until the oil life reset mode appears.

How do you reset the maintenance light on a Acura MDX?

Reset oil service light Acura MDX

  1. Turn the key to off position.
  2. Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II). Do not start the engine.
  3. Hold the SELECT and RESET buttons until the indicator resets, hold for about 10 seconds.

How do you reset the maintenance light on a 2012 Acura MDX?

To reset the 2012 Acura MDX maintenance light, please follow these instructions:

  1. Turn the ignition to (II) – do not start the engine.
  2. Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed.
  3. Press and hold the SEL/RESET button for more than 10 seconds.

How do you reset the maintenance required light on a 2008 Acura MDX?

Turn ignition switch to ON (II) position. Push and release the SEL/RESET button repeatedly until the engine oil life indicator is displayed. Press and hold SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on multi-information display.

How do you reset the TPMS light on a 2008 Acura MDX?

For cars with a turn-key ignition: turn the key to the “on” position, but do not start the vehicle. Hold the TPMS light reset button until the TPMS light blinks three times, then release the button. Operate the car for 20 minutes to reset the system.

How do you reset the maintenance light on a 2013 Acura MDX?

2007-2013 Acura MDX

  1. Take your key and turn it to position two. We didn’t start the engine.
  2. Make sure you are in blank display, SH-AWD, or Tire Pressure.
  3. Find the Oil Life.
  4. Hold down the SEL/RESET button.
  5. Select RESET.
  6. Turn the ignition off and then start the engine to verify the oil life has been reset.

How do you reset the service light on a Acura MDX?

Use the buttons on the steering wheel of your Acura MDX to reset the oil service reminder.

  1. Turn on the ignition.
  2. Use the steering wheel buttons to scroll to MAINTENANCE INFO.
  3. The remaining oil life will show on display.
  4. Select RESET. This will reset the oil reminder to 100%.

How do you reset the maintenance required light on a 2007 Acura MDX?

Where is the TPMS reset button on Acura MDX?

Where is the Acura TPMS reset button? For Acura vehicles without a central display, the TPMS reset button can usually be found under, or to the left, of the steering wheel.

How to reset oil service light Acura MDX?

Reset oil service light Acura MDX. From years: 2006, 2007, 2008, 2009, 2010. Turn the ignition to (II) do not start the engine. Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed. . Press and hold the SEL/RESET button for more than 10 seconds.

What kind of SUV is the Acura MDX?

The Acura MDX is a luxury SUV produced by Acura since 2000. MDX is the first crossover SUV that has a third row of seating. So did you get a maintenance light on Acura MDX today and then want to reset the oil life?

What does alphanumeric stand for in Acura MDX?

The alphanumeric moniker stands for “Multi-Dimensional luxury”. According to Honda, the MDX is the best-selling three-row luxury crossover of all time, with cumulative U.S. sales expected to surpass 700,000 units before the end of 2014.