How do you reset a vpro dimmer?
At any time you can reset the Varilight V-Pro dimmer to Mode 1 and the original brightness setting:
- Switch the light on and set to the maximum brightness.
- Turn the light off and back on three times, leaving a second in between each press.
How do I reset my LED dimmer switch?
Turn the lights OFF and back ON three times: OFF-ON-OFF-ON-OFF-ON (leaving approx. 1 second between presses). The light will come ON and dim down to OFF indicating a successful factory reset. Then the light will flash once showing the dimmer has returned to default MODE 1 (trailing edge).
Why do my LED bulbs not dim?
LED Bulbs may not shut off at lowest dim setting: this is caused by the dimmer thinking the bulb is completely off due to the low amount of wattage an LED consumes.
What’s the default mode for varilight v-Pro dimmers?
The Varilight V-Pro dimmers are set to run in trailing-edge mode (MODE 1) by default. This versatile mode is suitable for most types of lighting, including many dimmable LEDs. It is also “gentler” on the load (this is MODE 3).
Which is the best LED dimmer on the market?
The market leading Varilight V-Pro LED dimmer switch in a retrofit module that can be used to upgrade an existing wall plate. V-Pro dimmer modules are now available in 2 wattage types which are the V-Pro standard version which will dim up to 10 LEDs or a maximum of 120 watts.
Can a varilight dimmer be used on a toroidal led?
There is no limit on the number of transformers you can use as long as you keep within the maximum rating of the dimmer. VARILIGHT electronic transformers are suitable for controlling 12V a.c. rated LEDs (MR16). V-Pro dimmers are not suitable for wire-wound “toroidal” transformers.
Can a retrofit module be used to replace a non LED dimmer?
The retrofit module can be used to swap over a non LED compatible dimmer by unscrewing the nut and re-wiring which takes just a few minutes. This is ideal is you have existing dimmer switches and sockets that you don’t want to change. Standard version which has a maximum of 120W or up to 10 LEDs.