How do I use Moen quick connect?
Installation: Insert the faucet part into the end (A) of the quick connect. Press the white button (A) in to lock the faucet part in. Gently tug on the quick connect to verify it is secure.
How do I remove a Hydrolock connection?
To disconnect a Duralock fitting, grasp the hoses on both sides of the fitting and push them together while you depress the black button on the fitting. When the button is fully depressed, it unlocks the connection so you can pull the hoses apart.
How do I get rid of Moen quick connect?
Find the two white plastic tabs at the end of the Quick Connect fitting. Squeeze these tabs together with your fingers or pliers. As you squeeze these tabs they will become pushed into the black plastic housing. This will cause the white button on the opposite side of to pop out a little.
What is Duralock quick connect?
Moen’s Duralock Quick-Connect system offers a secure installation for the company’s kitchen and bath faucets. The time-saving system uses a proprietary, one-step, quick-connect installation, allowing kitchen and bathroom faucets to be installed without the use of tools.
Are Moen Hydrolock and Duralock interchangeable?
Note: Per Moen, both quick-connect clip versions of this hose are interchangeable.
How do you remove a quick connect faucet fitting?
For metal hoses with a quick connect: push up on the assembly towards the faucet as if you are installing it. Simultaneously pull the gray ring at the top of the brass tube down towards the floor – this relieves pressure on the collet holding the connector in place and allows you to remove it.
How to release a Moen hydro lock hose connector?
How to release a Moen hydro lock hose connector for kitchen faucet pull-out hose. – YouTube If playback doesn’t begin shortly, try restarting your device.
How do you connect a hydrolock to a duralock?
Connecting the hoses with a Duralock fitting is even easier. You simply insert the male fitting into the female one and push until you hear a click — no need to push the button. If the connection won’t click, remove the hose and check for obstructions in the female connector.
How to install a hydrolock supply hose kit?
Use extra care when installing new hose so that there is least amount of pressure on hose so that over time it is less likely to break or develop a hole, or crack, as our sink space was small, crowded 7. Was very easy to install, but a little tricky finding the right part, be very detailed, cautious, and selective
When do Moen duralock quick connect hoses come out?
The MOEN Duralock Kitchen and Bar Faucet Quick Connect Hose Kit has connectors integrated to the hose, they cannont be removed. If you have additional questions, please call us at 1-800-289-6636; we are available Monday through Friday from 9:00 am – 5:30 pm Eastern Time.