Can two dimmers go on one circuit?

You can only have one dimmer per group. You can put the dimmer at either location, but not both locations. There are “companion” dimmers available from some companies, that allow you to place additional dimmers in the circuit.

What is the blue screw on a Lutron dimmer?

Brass screw: Connect wire (Traveller 2 – note wire color) to this screw. 4. Blue screw: Connect wire (Traveller 1 – note wire color) to this screw. Wiring the Main Dimmer on the load-side.

How do you program a LED dimmer switch?

Just follow these steps:

  1. Switch the light on and set to the minimum brightness.
  2. Turn the light off and on three times, leaving a second in between each press.
  3. The lights will go up and down in brightness to show the dimmer is in configuration mode before going off.
  4. Turn the dimmer fully clockwise.
  5. Use as normal.

Can you install dimmer switch on light with two switches?

Installing the Two-Way Dimmer Switch Traditionally, you cannot dim a light from two different switches, as it will cause a conflict in the circuitry. Any electrician will tell you that this will not work for a regular double switch three-way circuit. However, you can set up specialized two-way dimmers using a master and slave switch.

Can I use dimmer switch with LED lights?

LED light bulbs can be used in light fixtures controlled by dimmer switches, but you may well find that traditional dimmers may not work—or may work inadequately—with some LED bulbs. The bottom line is compatibility.

Can any light switch be a dimmer?

Light Bulbs will work with any dimmer switch. This is because bulbs will only burn out if you go over their voltage, not if you stay under it. In fact, running a light bulb at a lower voltage can actually increase its lifespan. If anything, you should be looking for the most inexpensive available dimmers, since you won’t need any more.

What is a remote dimmer switch?

What is a Remote Dimmer Switch? A remote dimmer switch is a switch which remotely controls the level of light emitted by a lamp. Regular wall dimmer switches control the circuits on which lamps are placed to adjust light levels and a remote dimmer switch can add more functionality to such a switch.