What do I do if my toilet is wobbling?
Toilets wobble when they aren’t held securely to the floor, and if you let the wobble persist, they can leak and give you more serious problems. More often than not, the wobble is caused by loose toilet bolts, but the flange may also be responsible. It may be corroded, broken or set too high.
How do you secure a loose toilet to the floor?
Check the flange bolt at each side of the toilet, using a pair of pliers or a small wrench. If a bolt is loose, tighten it slowly just until it is snug. Check the other bolt to make sure it is equally snug, then test the toilet for rocking. If it still rocks, proceed with shimming the base.
How much does it cost to fix a wobbly toilet?
The national average price for repairs is $75 to $200, with most people paying $150 on average to replace the syphon….Toilet Repair Price by Type of Repair.
| Type of Repair | Average Cost (Labor Included) |
|---|---|
| Wobbly Toilet | $60 – $150 |
| Seal | $60 – $150 |
| Flush | $75 – $200 |
| Bowl | $100 – $300 |
Why is my toilet loose?
Your wobbly toilet may be moving because the mounting bolts that hold it down have nothing to grab onto anymore. You might think your loose toilet bowl is held down to the floor by a couple bolts. While this is true, you should know that the bolts don’t go directly to the floor. Instead, they secure to a toilet flange.
Is it OK to caulk around a toilet?
Caulk prevents a fouling area. If mop water, bathtub water, or a less pleasant “bathroom liquid” gets underneath the toilet, there is no way to clean it up. Caulking around the base of the toilet will prevent this from happening.
Can you over tighten toilet bolts?
If you tighten it too much, you can pull the closet bolt out through the flange, ruining the flange or breaking the porcelain. DO NOT tighten it as tight as it will go, like you’re building something or working on your car – you’ll break the flange, chip or crack the porcelain or both.
How do you fix rocking toilet?
Sometimes a rocking toilet can be fixed by tightening the two bolts at the base of the toilet, called flange bolts or closet bolts. Do this carefully! Tightening the bolts too much can crack the brittle porcelain of the toilet, for which there is no repair. Check the flange bolt at each side of the toilet,…
How do you repair a flush valve?
You can repair a minor leak by emptying the tank, drying the valve and spreading silicone grease on the valve seat and flapper to create a better seal. If you aren’t sure if the flush valve is leaking, put food coloring in the tank. The valve is leaking if the bowl water turns that color.
What is a rocking toilet?
Rocking is for concerts and chairs—not toilets. If your toilet is wobbly or loose but not leaking, this quick fix might be just what you need. Toilets usually rock because they are not resting flush against the floor. Underneath the toilet base is a round toilet flange that connects the toilet to the drain pipe.