Is a 3/8 the same as a 10mm?
10mm = just over 3/8 inch.
Is 3/8 and 12mm the same?
Refer to this chart when the measurements are noted in milimeters….
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 9mm | Just short of 3/8 Inch | 0.35433 Inches |
| 10mm | Little over 3/8 Inch | 0.39370 Inches |
| 11mm | 7/16 Inch | 0.43307 Inches |
| 12mm | Just short of 1/2 Inch | 0.47244 Inches |
What does 3/8 convert to in millimeters?
Conversion table inches to mm
| Dimensions — Inches to Metric | ||
|---|---|---|
| 0.375” | 3/8” | 9.53 mm |
| 0.438” | 7/16” | 11.13 mm |
| 0.500” | 1/2” | 12.70 mm |
| 0.563” | 9/16” | 14.30 mm |
What is the closest metric size to 3 8?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 3/16″ | 10mm | 3/8″ |
| 1/4″ | 11mm | 7/16″ |
| 5/16″ | 13mm | 1/2″ |
| 3/8″ | 14mm | 9/16″ |
Is slightly bigger than 3 8?
Can’t remember what 9/64″ is in decimals? Neither can we….
| Fraction Conversion Table | ||
|---|---|---|
| Fraction | Decimal | Millimeters |
| 3/8 | 0.375 | 9.525 |
| 25/64 | 0.390625 | 9.921 |
| 13/32 | 0.40625 | 10.318 |
What is the metric size for a 3 8?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 3/8″ | 14mm | 9/16″ |
| 7/16″ | 16mm | 5/8″ |
| 1/2″ | 19mm | 3/4″ |
| 9/16″ | 21mm | 13/16″ |
What size bolt is between 5/16 and 3 8?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 1/8″ | 8mm | 5/16″ |
| 3/16″ | 10mm | 3/8″ |
| 1/4″ | 11mm | 7/16″ |
| 5/16″ | 13mm | 1/2″ |
What size is 3/8 screw?
All screws are listed by diameter but the terms used for different types of screws vary. A 3/8″-16 screw is a machine screw, the “3/8” is the diameter and the “16” is the number of threads per inch. This screw will thread into a nut or threaded hole.