Do you need to fog a outboard boat engine for winter?

Do you need to fog a outboard boat engine for winter?

Fog the cylinders while flushing the motor with antifreeze. To prevent freeze damage, prior to winter storage, many owners simply drain the cooling water out of their outboards. This will prevent residual water from turning into ice and causing damage during a hard freeze.

How do you winterize an outboard motor?

Connect Earmuffs and Warm up the Engine Attach a pair of ear muffs or flush muffs to the water intake ports on the lower end of the unit and connect it to a hose. Turn the water on and start the engine. Let the engine warm up for about 5 minutes to treat the entire engine with stabilized gas mix.

Do you need to winterize an outboard motor?

If you want your engine to start in the spring and last you many years and plan on not using your engine all winter, you do have to winterize an outboard motor. Winterizing the engine helps to prevent damage during disuse, which is the chief cause for engine failure. Failing to winterize may lead to complications.

What can I use instead of fogging oil?

While not ideal, WD40 is an alternative to fogging oil if none is available – it certainly didn’t hurt anything and would have kept the rust and cooties out better than nothing.

How much does it cost to winterize an outboard motor?

If you bring your boat to a shop to have it winterized, you can expect to pay between $300 and $400.

Is it bad to not winterize your boat?

Winterizing a boat is an essential process unless you plan to make necessary repairs to your boat come springtime. If you do not winterize your boat, any water droplets left could freeze, expand, and crack the components they were in. This could cause anything from blowing off a hose to completely ruining your engine.

Will a outboard motor freeze?

A very popular question asked by a concerned boat owner, (mainly outboard motorboats) is Will A Boat Motor Freeze? The simple answer is yes. If the temperature is low enough, it can freeze. Water, oil and other engine related lubrication coupled with freezing temperatures is the main culprit for freezing a boat motor.

Can you use WD40 as fogging oil?

Re: Fogging oil— is it WD40? a “good” fogging oil will have better adhearsion, to coat your internal engine parts, and stay there. WD-40 would run off parts, and even evaporate over time.

How do you flush an outboard engine?

How to Flush Outboard Engines that have a Flushing Port: Remove the cap from the flushing port, and thread your garden hose into it. If the boat is in the water, tilt the engine up until the outdrive has drained of saltwater. Turn on the water, and let it run for at least five minutes. Do not start the engine. Remove the hose, and replace the cap.

Begin by connecting your garden hose to a faucet, hooking it to a motor flusher, placing this over the raw water intake, turning on the freshwater and starting your boat’s engine. Let the outboard warm up to operating temperature, so the thermostat will open and let coolant circulate through the entire engine.

How to operate an outboard engine?

Steps Check the oil level on four-stroke motors. Make sure there is fuel in the tank and the fuel tank vent is open and clear. Squeeze the primer bulb on the fuel line repeatedly until it is firm. Move the throttle into the hi-idle position. Determine whether your motor has choke plates or an enrichment system.

How do outboard motors work?

An outboard motor is a propulsion and navigation machine for a boat. The outboard motor features an adjustable choke that changes the amount of fuel in the fuel and air mixture. Outboard motors feature a choke when they work by internal combustion.