Do you sand between color and clear coat?

We usually recommend not sanding between touch up base color paint, clearcoat, and primer coats. However, if a little dirt lands in the paint you may let the paint dry and sand out the speck. If you’re having an issue with too much texture or getting runs in the paint, you may want to sand.

Can you polish base coat before clear coat?

Can You Polish Base Coat Before Clear? Upon putting on the clear coat, you cannot polish the base coat. If the surface of your base coat has been contaminated, then it is prone to adhesion problems, so wet sand your base coat gently to remove blemishes.

What grit should I sand before clear coat?

Be sure to use the wet sanding technique for best results. 1500 to 2000 Grit – When you need to smooth out surface imperfections and scratches before and after applying the clear coat, this is the grit range to use.

Do you have to wet sand base coat before clear?

The base coat is to be wet-sanded before it is allowed to dry. Surfaces become smoother with wet sanding. The clear coating should be smooth and clean before spraying; the application should be made on three or four layers.

Can you clear coat over 1500 grit sandpaper?

Honestly, in my opinion, I like 400-grit but 400-600 is a great range to put your base coat and clear coat over. Anything smoother and finer than that like 800, 1000, 1200,1500-grit…is NOT good because your paint is just not going to stick.

Can you spray clear coat after wet sanding?

Re: Why isn’t applying clear coat after wet-sanding or cutting standard auto detailing practice? Applying clearcoat perfectly requires a spray booth and training in painting. Even with that, you get orange peel that needs to be wet sanded after a day or two of curing.

Should base coat be dry before clear?

Let the base coat dry completely before moving on to the clear coat. It’ll usually take about 30 minutes for the base coat to dry, but depending on the temperature and humidity, it could take closer to 60 minutes. You’ll know it’s dry when it’s smooth to the touch and your fingers don’t drag on it when you touch it.

Can you clear coat over 400 grit?

You should paint over 400-grit. That is an excellent grit to paint your base coat and clear coat over, including enamels or anything else that you’re doing. You can actually go even more coarser if you’re doing a single stage enamel.